CARBOLINE SEA - BARRIER 3000 ANTIFOULING

Country: Australia

Language: English

Source: APVMA (Australian Pesticides and Veterinary Medicines Authority)

Buy It Now

Active ingredient:

THIRAM; COPPER PRESENT AS CUPROUS OXIDE

Available from:

RESENE PAINTS (AUSTRALIA) LIMITED

INN (International Name):

Cu as cuprous oxide(764g/L)+thiram(44g/L)

Pharmaceutical form:

PAINT

Composition:

THIRAM CARBAMATE-DITHIOCARBAMATE Active 44.0 g/L; COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 764.0 g/L

Units in package:

10L; 4L; 5 L

Class:

A - Agricultural

Manufactured by:

RESENE PAINTS

Therapeutic group:

COMMERCIAL VESSEL(STEEL,TIMBER,FIBREGLAS | FIBREGLASS HULL | STEEL HULL | TIMBER HULL

Therapeutic area:

ANTIFOULING

Therapeutic indications:

MARINE GROWTH | BARNACLES | FRESH-WATER FOULING ORGANISMS | MARINE FOULING ORGANISMS | MUSSELS

Product summary:

Poison schedule: 6; Withholding period: WHP:N/A; Host/pest details: COMMERCIAL VESSEL(STEEL,TIMBER,FIBREGLAS: [MARINE GROWTH]; Poison schedule: 6; Withholding period: ; Host/pest details: COMMERCIAL VESSEL(STEEL,TIMBER,FIBREGLAS: [MARINE GROWTH]; An ablative antifouling for use on suitably prepared steel, fibreglass, ferro cement, and wooden hulls.DO NOT use on aluminium hulls or stern drives

Authorization status:

Registered

Authorization date:

2023-07-01

Patient Information leaflet

                                f
-
c
-
~~b-~i~~~--s~~
=
i3~
-
~~~
-
~-3o
-
oo
-
A~
-
iii~~ii~-9-~--4-&-1o-iii~~~-
--
- -
--
-
---
-
---
-
--
-
-
----------------
-
-
- - -
- -
--
--
---
-
---
--
----
--
-- --
f'~9~-T~t9-­
l
!
Primary
pack-
Front panel
03/01/2012
[_------
-
---------
-
---------
--
-
--
--
--
---
---
---
-
---
-
--
-
--
--
----
--
-----
---
---
--------
--
--
------------------
-
--------
-
----
--
--------------------
-----
--
--
--
-
-- --
-----------
-
----
--
---
-
--------------
POISON
KEEP OUT OF REACH OF CHILDREN
READ SAFETY DIRECTIONS BEFORE OPENING OR USING
CARBOLINE
Coatings
-
Linings
-
Fireproofing
SEA-BARRIER 3000 ANTIFOULING
Active constituents:
764 g/L COPPER present as cuprous oxide
44 g/L TH I
RAM
•
RLP
_Ap_
_proved _
AN ABLATIVE ANTIFOULING FOR USE
ON
SUITABLY PREPARED STEEL,
FIBREGLASS, FERROCEMENT AND WOODEN HULLS
Infopest
Verified
DIRECTIONS FOR USE
RESTRAINTS:
DO
NOT use
on
aluminium hulls or stern drives
SURFACE
PREPARATION:
Sea-Barrier 3000 Antifouling
paint
is
designed
to
overcoat
Carboline Coatings Bottom Systems. Sea-Barrier 3000 Antifouling
is
compatible with a wide
range
of
anticorrosive and antifouling paints.
Its use over products other than Carboline
Coatings Bottom Systems should
be
referred
to
Resene Paints (Australia) Limited for specific
recommendations. If Sea-Barrier 3000 Antifouling
is
applied over
an
epoxy hull coating,
it
must be applied before the epoxy has fully cured hard,
ie
when the epoxy
is
tack free but still
soft to finger nail pressure. For the repainting of existing
antifouling and
to
facilitate bottom
cleaning
we
recommend high pressure water blast cleaning (5000 psi minimum) and
wash
with AL TEX P40 Pre-Painting Cleaner diluted 1 part
to
10
parts water.
It
is
recommended
that after 3-4 repaints that the old antifouling coatings
be
removed and then repaint the hull
with Carboline Coatings Bottom System and Sea-Barrier 3000 Antifouling
as above.
MIXING AND THINNING: Stir thoroughly before use. Sea-Barrier 3000
Antifouling does not
require thinning, except possibly
in
hot wind
                                
                                Read the complete document
                                
                            

Summary of Product characteristics

                                MSDS: AF3000 Antifouling 
 
Page 1 of 8 
Prepared:   28/10/09                         
                                        
                                       
                                         
                     Revision:  2
nd
 Revision 
 
Printed:13/04/12 
 
Resene Paints (Australia) Limited trading as Altex Coatings. 
 
MATERIAL SAFETY DATA SHEET 
 
 
SECTION 1.   
IDENTIFICATION OF THE MATERIAL AND SUPPLIER 
 
 
PRODUCT NAME 
AF3000 ANTIFOULING 
OTHER NAMES 
Paint.  Product Code AF3--S 
RECOMMENDED USE 
High performance, ablative antifouling coating. 
 
COMPANY NAME 
ADDRESS 
Resene Paints (Australia) Limited T/A Altex Coatings. 
7 Production Avenue 
Ernest Junction, Queensland 4214. 
 
EMERGENCY TEL 
Available Monday – Friday, 8:00 a.m. – 5:00 p.m.  
FREE CALL 
PHONE 
FAX 
1800 738 383  
07 5512 6600 
07 5512 6698 
 
 
SECTION 2.   
HAZARDS IDENTIFICATION 
 
 
HAZARD CLASSIFICATION 
HAZARDOUS SUBSTANCE. DANGEROUS GOODS.  According 
to the criteria of NOHSC and the ADG Code.  
 
HAZARD STATEMENTS 
Xn:   Harmful 
N:     Dangerous for the environment 
 
RISK PHRASES 
 
R10 Flammable. 
R20/21/22 Harmful by inhalation, in contact
with skin and if swallowed. 
R36/37/38 Irritating to eyes, respiratory system and skin. 
R40 Limited evidence of a carcinogenic effect. 
R41 Risk of serious damage to the eyes. 
R43 May cause sensitisation by skin contact. 
R67 Vapours may cause drowsiness and dizziness. 
R50 Very toxic to aquatic organisms. 
R53 May cause long term adverse effects in the aquatic
environment. 
 
SAFETY PHRASES 
S7/9 Keep container tightly closed and in a well-ventilated place. 
S13 Keep away from food, drink and animal feeding stuffs. 
S16 Keep away from source of ig
                                
                                Read the complete document