Country: Australia
Language: English
Source: APVMA (Australian Pesticides and Veterinary Medicines Authority)
COPPER PRESENT AS CUPROUS OXIDE; COPPER PRESENT AS CUPROUS OXIDE; COPPER PRESENT AS CUPROUS OXIDE; COPPER PRESENT AS CUPROUS OXIDE; DICHLOFLUANID; DICHLOFLUANID; DICHLOFLUANID; DICHLOFLUANID
AKZO NOBEL PTY LIMITED
Cu as cuprous oxide(602.6-769g/L)+dichlofluanid(13-16.6g/L)
PAINT
COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 759.4 g/L; COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 602.6 g/L; COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 737.9 g/L; COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 768.8 g/L; DICHLOFLUANID SULFANYL Active 16.4 g/L; DICHLOFLUANID SULFANYL Active 13.0 g/L; DICHLOFLUANID SULFANYL Active 15.9 g/L; DICHLOFLUANID SULFANYL Active 16.6 g/L
10L; 4L
A - Agricultural
AKZO NOBEL
BOAT - EXTERIOR (ANTIFOULING)
ANTIFOULING
MARINE GROWTH | BARNACLES | FRESH-WATER FOULING ORGANISMS | MARINE FOULING ORGANISMS | MUSSELS
Poison schedule: 6; Withholding period: WHP: N/A; Host/pest details: BOAT - EXTERIOR (ANTIFOULING): [MARINE GROWTH]; Poison schedule: 6; Withholding period: ; Host/pest details: BOAT - EXTERIOR (ANTIFOULING): [MARINE GROWTH]; Use as an antifouling paint to control marine growth below the waterline on pleasure craft.DO NOT use on aluminium/alloy or zinc sprayed surfaces
Stopped
2019-06-30
MICRON EXTRA is a high strength antifouling, incorporating Biolux technology, that offers protection in most fouling conditions. Self polishing technology ensures a continuous renewal of the active layer of the paint which results in a hull that stays cleaner for longer and without a heavy build up of old paint. RESTRAINT: DO NOT USE ON ALUMINIUM/ALLOY OR ZINC SPRAYED SURFACES. MAY BE APPLIED OVER: Yacht Primer, Primocon, Interprotect, and most types of antifoulings provided they are in sound condition. CAN BE OVERCOATED WITH: Itself and selected other antifoulings. NEW SURFACES: TIMBER: Surfaces must be clean, dry and well sanded. Prime with either Yacht Primer or Primocon (single pack options) or Interprotect (two pack option). EPOXY SHEATHED TIMBER/EPOXY COMPOSITE/POLYESTER GRP: Ensure all traces of release agent and/or amine bloom are removed from the surfaces using Surface-Prep. Sand to remove gloss. Prime with Interprotect. STEEL: Grit blast to Australian Standard 1627.4 Class 2.5-3 or angle grind to bright shiny steel. Prime with Interprotect (2 pack) or Primocon (Single pack). ALUMINIUM: Do not use this product. IMPORTANT NOTES: Refer to primer labels for details of primer application. Refer to filler labels and/or literature for any filling and fairing information required. PROPS AND SHAFTS: Longlife or Interspeed 2000 are recommended, refer label data. PREVIOUSLY ANTIFOULED SURFACES: Check existing antifouling may be overcoated with this product. Desalinate by fresh water wash down. Follow by wet sanding with typically 150-180 grit if the surface is in sound condition or typically 80 grit if it is in poor condition. When the surface is free of old slime/fouling build up, any loose and flaking coatings and any other contamination, allow to dry thoroughly. Patch prime any bare areas as for new work above and then apply new antifouling. On old antifouling in good condition but of unknown type, seal with one brushed coat of Primocon, after washing and sanding down VESSELS OF SUITABLE CONSTRUCTION BUT INC Read the complete document
AKZO NOBEL YACHT COATINGS MATERIAL SAFETY DATA SHEET YBA904 MICRON EXTRA DOVER WHITE VERSION NUMBER 5 REVISION DATE 10/13/11 1. Product and company identification Hazardous according to criteria of Safework Australia. Classified as a Dangerous Good for transport according to the ADG code (7th edition). Product Name MICRON EXTRA DOVER WHITE Product Code YBA904 Intended use This product is intended for use in the Marine and Protective Coatings markets. Refer Technical Data Sheet. Application Method Apply by brush and roller for small areas. Airless spray for large areas. Refer Technical Data Sheet. Company Name Akzo Nobel Yacht Coatings Unit E54, 76 Waterway Drive Coomera Queensland 4209 Australia Telephone No. (07) 5573 9600 Fax No. (07) 5573 9677 24 hour Emergency Telephone No. 1800 680 071 For Poisons Advice telephone 131 126 For Advice to Doctors & Hospitals only 2. Hazard Identification R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R62 - Possible risk of impaired fertility. R63 - Possible risk of harm to the unborn child. R10 - Flammable. R20/22 - Harmful by inhalation and if swallowed. R41 - Risk of serious damage to eyes. R43 - May cause sensitisation by skin contact. R65 - Harmful: May cause lung damage if swallowed. S2 - Keep out of the reach of children. S9 - Keep container in a well-ventilated place. S16 - Keep away from sources of ignition - No Smoking. S23 - Do not breathe vapour/spray. S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S46 - If swallowed, seek medical advice immediately and show this container or label. S51 - Use only in well-ventilated areas. Poison Schedule: S6 Si Read the complete document