Transocean Optima Antifouling 2.32

Country: Australia

Language: English

Source: APVMA (Australian Pesticides and Veterinary Medicines Authority)

Active ingredient:

COPPER PRESENT AS CUPROUS OXIDE; COPPER PRESENT AS CUPROUS OXIDE; COPPER PRESENT AS CUPROUS OXIDE; COPPER PRESENT AS CUPROUS OXIDE; LIQUID HYDROCARBON; LIQUID HYDROCARBON; LIQUID HYDROCARBON

Available from:

WAGON PAINTS AUSTRALIA PTY LTD

Pharmaceutical form:

PAINT

Composition:

COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 407.0 g/L; COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 416.0 g/L; COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 417.0 g/L; COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 413.0 g/L; LIQUID HYDROCARBON SOLVENT Other 385.0 g/L; LIQUID HYDROCARBON SOLVENT Other 379.0 g/L; LIQUID HYDROCARBON SOLVENT Other 388.0 g/L

Units in package:

10L; 1L; 20L; 5L

Class:

A - Agricultural

Therapeutic area:

ANTIFOULING

Product summary:

Poison schedule: 5; Withholding period: ; Host/pest details: BOAT - EXTERIOR (ANTIFOULING): [MARINE FOULING]; BOAT HULL (REFER TO LABEL): [MARINE FOULING]

Authorization status:

Registered

Authorization date:

2023-07-01

Patient Information leaflet

Transocean Optima Antifouling 2.32
84506/131928
Product Name:
APVMA Approval No:
Label Name:
Transocean Optima Antifouling 2.32
Signal Headings:
CAUTION
KEEP OUT OF REACH OF CHILDREN
READ SAFETY DIRECTIONS BEFORE OPENING OR USING
Constituent
Statements:
RED-BROWN
ACTIVE CONSTITUENT:
417 g/L COPPER PRESENT AS CUPROUS OXIDE
SOLVENT:
388 g/L LIQUID HYDROCARBONS
PINK
ACTIVE CONSTITUENT:
416 g/L COPPER PRESENT AS CUPROUS OXIDE
SOLVENT:
388 g/L LIQUID HYDROCARBONS
BLUE
ACTIVE CONSTITUENT:
413 g/L COPPER PRESENT AS CUPROUS OXIDE
SOLVENT:
385 g/L LIQUID HYDROCARBONS
BLACK
ACTIVE CONSTITUENT:
407 g/L COPPER PRESENT AS CUPROUS OXIDE
SOLVENT:
379 g/L LIQUID HYDROCARBONS
Statement of Claims:
A tin-free, conventional antifouling for the control of marine growth
below the waterline on
vessels
Net Contents:
1L
5L
10L
20L RLP APPROVED
Restraints:
Directions for Use:
Stir well before use.
Application: May be applied by airless spray, brush or roller.
Recommended dry film
thickness per coat 75 μm (range 50 - 75 μm), wet film thickness 130
μm (range 90 – 130
μm). Theoretical spreading rate 7.6 m2/l at 130 μm dft. When
applying by brush or roller,
multicoats may be needed to achieve the specified dry film thickness.
For technical details, refer to product data sheet available from
Wagon Paints (address at
bottom of this label)
Thinner: Transocean Standard Thinner 6.01, maximum 3% for airless
spray, 5% for brush/
roller.
Surface Preparation: The product can be applied on all Transocean
anticorrosive systems.
For system repair/recoat, all surfaces should be clean, dry and free
from contamination.
Contact your local Transocean representative for advice and a full
specification.
Application conditions: Refer to product data sheet.
Drying and recoating times: At 23oC substrate temperature, touch dry 1
hour, dry to recoat
minimum 6 hours, maximum 5 days. Refer to product data sheet for
further detail and other
temperatures.
Undocking: As soon as possible after application of the final layer,
but no sooner than the
minimum drying ti