Land: Australia
Språk: engelsk
Kilde: APVMA (Australian Pesticides and Veterinary Medicines Authority)
AVAILABLE IODINE; GLYCERINE; PROPYLENE GLYCOL
DELAVAL PTY LTD
propylene glycol(220g/L)+glycerol(215g/L)+available iodine(40g/L)
TOPICAL SOLUTION/SUSPENSION
AVAILABLE IODINE MINERAL Active 40.0 g/L; GLYCERINE SOLVENT Active 215.0 g/L; PROPYLENE GLYCOL SOLVENT Active 220.0 g/L
1000L; 100L; 110L; 200L; 20L; 25L; 5L
VM - Veterinary Medicine
DERMATOLOGICAL PREPS.
Poison schedule: 6; Withholding period: WITHHOLDING PERIOD: EXPORT SLAUGHTER I NTERVAL (ESI): ZERO (0) DAYS BEFORE US ING THIS PRODUCT CONFIRM THE CURRENT ESI FROM DELAVAL ON (03) 83367977 OR APVMA WEBSITE (www.apvma.gov.au/resid ues); Host/pest details: COW (TEAT/UDDER): [MASTITIS, TEAT SANITISER]; An aid in reducing the spread of mastitis -causing organisms in lactating dairy cows.
Registered
2023-07-01
Page 1 of 2 DELAVAL TEATSAN EXTRA CONCENTRATED POST MILKING TEAT SANITISER WITH EMOLLIENT 69709/110455 Product Name: APVMA Approval No: Label Name: DELAVAL TEATSAN EXTRA CONCENTRATED POST MILKING TEAT SANITISER WITH EMOLLIENT Signal Headings: POISON KEEP OUT OF REACH OF CHILDREN READ SAFETY DIRECTIONS BEFORE OPENING OR USING FOR ANIMAL TREATMENT ONLY Constituent Statements: 220g/L PROPYLENE GLYCOL, 215g/L GLYCERINE 40g/L AVAILABLE IODINE Mode of Action: Statement of Claims: An aid in reducing the spread of mastitis-causing organisms in lactating dairy cows Net Contents: 5L, 20L, 25L, 100L, 110L, 200L, 1000L Dosage and Adminstration: Ensure teats are CLEAN and DRY before milking to reduce organic and bacterial contaminations and iodine residue in the milk. If washing is required for heavily soiled udders or teats, ensure they are properly dried. Thoroughly spray or dip all teats after every milking. Mix fresh solutions daily. Do not top up solutions made up on a previous day. To make a 0.5% available iodine solution (also containing 5% emollient), dilute 1 part Teatsan' with 7 parts of clean potable water or cooled boiled tap water. Emollient such as DeLaval's udder emollient may be included to a maximum of 10% of the final solution. If emollient is added, dilute 2.5 parts of `Teatsan' in 16.5 parts of water with 1 part of emollient. Dip: Use a plastic or other non-metal type container for iodine solution. Clean out dip cup as teat dip gets low. Do not top up the dip cup. Spray: Spray upwards from underneath the teats, not from the side and ensure the whole surface of each teat is covered and a droplet forms on the teat end. RLP APPROVED Page 2 of 2 Environmental statements: First Aid: Disposal: Metal drums and plastic containers: This container can be recycled if it is clean, dry, free of visible residues and has the drumMUSTER logo visible. Triple or pressure rinse container for disposal. Dispose of rinsate or any undiluted chemical according to State legislative requirements. Wash outside of the container and t Les hele dokumentet
DeLaval Pty. Ltd. ACN 004 210 459, 1 Global Drive, Westmeadows, Victoria 3049, Australia. Ph. +61-3-8336 7977, Fax +61-3-8336 7900 www.delaval.com.au 20 L TEATSAN EXTRA CONCENTRATED POST MILKING TEAT SANITISER WITH EMOLLIENT ACTIVE CONSTITUENTS: 220g/L PROPYLENE GLYCOL 215g/L GLYCERINE 40g/L AVAILABLE IODINE An aid in reducing the spread of mastitis-causing organisms in lactating dairy cows TEATSAN EXTRA CONCENTRATED POST MILKING TEAT SANITISER WITH EMOLLIENT DIRECTIONS FOR USE Ensure teats are CLEAN and DRY before milking to reduce organic and bacterial contaminations and iodine residue in the milk. If washing is required for heavily soiled udders or teats, ensure they are properly dried. Thoroughly spray or dip all teats after every milking. Mix fresh solutions daily. Do not top up solutions made up on a previous day. DOSAGE AND ADMINISTRATION: To make a minimum of 0.5% available iodine solution (also containing 5% emollient), dilute 1 part “Teatsan” with 7 parts of clean potable water or cooled boiled tap water. Emollient such as “DeLaval Udder Emollient” may be included to a maximum of 10% of the final solution. lf emollient is added, dilute 2.5 parts of “Teatsan” in 16.5 parts of water with 1 part of emollient. To mix up a 20L batch of ‘Teatsan’ solution: Without additional emollient (5% emollient) With additional emollient (10% emollient) Teatsan 2.5L 2.5L Emollient None 1L Water 17.5L 16.5L 20 Litres 20 Litres Dip: Use a plastic or other non-metal type container for iodine solution. Clean out dip cup as teat dip gets low. Do not top up the dip cup. Spray: Spray upwards from underneath the teats, not from the side and ensure the whole surface of each teat is covered and a droplet forms on teat end. WITHHOLDING PERIOD(S): ZERO (0) DAYS EXPORT SLAUGHTER INTERVAL (ESI): ZERO (0) DAYS SAFETY DIRECTIONS If skin contact occurs, remove contaminated clothing and wash skin thoroughly. If in eyes, hold eyes open, flood with water for at least 15 minutes and see a doctor. If poisoning occurs contact Les hele dokumentet