국가: 오스트레일리아
언어: 영어
출처: APVMA (Australian Pesticides and Veterinary Medicines Authority)
CHLORINE PRESENT AS SODIUM DICHLOROISOCYANURATE
WOBELEA PTY LIMITED
Cl as sod.dichloroisocyanurate(44.8g/kg)
GRANULAR FORMULATION
CHLORINE PRESENT AS SODIUM DICHLOROISOCYANURATE MINERAL-CHLORINE Active 44.8 g/kg
10kg; 12.5kg; 25kg
A - Agricultural
POOLKARE CHEMICALS
SWIMMING POOL
ALGICIDE
POOL FUNCTIONS - SEE LABEL
Poison schedule: 5; Withholding period: WHP: N/A; Host/pest details: SWIMMING POOL: [POOL FUNCTIONS - SEE LABEL]; Poison schedule: 5; Withholding period: ; Host/pest details: SWIMMING POOL: [POOL FUNCTIONS - SEE LABEL]; Function: increase total alkalinity by 150 ppm; provide initial chlorination 10 ppm; reduce pH fluctuations; remove impurities (e.g. iron).
Registered
2023-07-01
CAUTION KEEP OUT OF REACH OF CHILDREN READ SAFETY DIRECTIONS BEFORE OPENING POOLKARE TAMMIT ACTIVE CONSTITUENT: 44.8 g/Kg CHLORINE (Cl) present as SODIUM DICHLOROISOCYANURATE 1. Increase Total Alkalinity by 150 ppm. 3. Reduce pH fluctuations. 2. Provide initial chlorination 10 ppm. 4. Remove impurities. Eg Iron Net Contents: 10 Kg 12.5 Kg 25 Kg DIRECTIONS FOR USE: 1. TAMMIT is used for starting up outdoor pools. If your pool is indoors than Poolkare – BINGO B or COMBAT is more suitable. 2. Calculate volume of water to be treated and quantity of TAMMIT required from dosage table. If filling time exceeds 24 hours give half treatment when pool half full – balance on completion of filling. TAMMIT DOSE TABLE Capacity in cubic metres 30 40 50 60 70 100 TAMMIT dose KG 7.5 10 12.5 15 17.5 25 3. Slurry KG dose of TAMMIT in a plastic bucket of water and pour over pool returns with filter running. 4. Operate filter for 4-6 hours mixing. Switch off, allow 12 hours to settle. Vacuum any deposits to waste immediately to avoid staining. 5. Recommence filtration. Add top up water to skimmer with filter on. 6. pH control. Do not add acid till chlorine level drops below 1 ppm. 7. Dilute 1 part acid with 5 parts water. Distribute over pool returns with filter on. Do not use more than 2 Kg of dry acid or 2 Ltr of liquid acid in any 24 hour period. Maintain pH 7.8 – 8.0. 8. Total Alkalinity. Initial readings should be 140-160 ppm, do not adjust until T.A falls below 120. 9. Chlorination. In new pools Trichlor, TICA or Dichlor, SDIC are preferred with liquid chlorine to superchlorinate. Avoid calcium based products initially. 10. At 12 weeks, aim for these readings: Refer to Poolkare “ULTIMATE POOL HANDOVER” for ongoing chemical additions. pH 7.8 and stable, acid requirement small and infrequent. Total Alkalinity 140 – 160 ppm. Cyanuric level 20 ppm. Total Hardness 100-200 max. NOT TO BE USED FOR ANY PURPOSE OR IN ANY MANNER CONTRARY TO THIS LABEL UNLESS AUTHORISED UNDER APPROPRIATE LEGISLATION. STORAGE AND CONTAINER DISPO 전체 문서 읽기
18 Embrey Crt, Pakenham, Vic. 3810 Tel: (03) 5940 1077 Fax: (03) 5940 2599 1 1st December, 2001 Revised April, 2006 Revised April 2011 MATERIAL SAFETY DATA SHEET TAMMIT – WATER BALANCER SUITABLE FOR REACTIVE FINISH* POOLS & SPAS COMPANY DETAILS: Company : Wobelea Pty Ltd Address : 18 Embrey Crt, Vic. 3810 Phone : (03) 5940 1077 Emergency : (03) 5629 5424 IDENTIFICATION: FORMULATED PRODUCT NOT CLASSIFIED AS DANGEROUS GOODS. PRODUCT NAME: TAMMIT Other Name: N/A UN Number : 2465 Hazchem Code : 2 PE Dangerous Goods Class : 5.1 (Oxidizer) Subsidiary risk : 6.1 Poisons schedule number : N/A USE Recommended use : Water balancer in pools and spas. PHYSICAL PROPERTIES/DESCRIPTIONS Appearance : White, free flowing powder with faint halogenous odour Flammability Limit : Will not support combustion Flash point : N/A Melting point : 163-164 C Solubility in water 10 gm/100 gm @ 25 C OTHER PROPERTIES Chemical Entity: Alkaline salts and Sodium dichloro isocyanurate (SDIC) CAS No. N/A * = Marble, Pebble and fully tiled surfaces. 18 Embrey Crt, Pakenham, Vic. 3810 Tel: (03) 5940 1077 Fax: (03) 5940 2599 2 Proportions: 91.5 % inert alkaline salts and 8.5 % 전체 문서 읽기